2022 Rules


General  Rules


 RACEceivers Are Required

Frequency 454.000

RACEceiver Rentals Are Available

Burris Rules

AKRA Rules As Printed For 2023

WKA Rules Apply To Animals & Flatheads

AKRA Rules Apply To Clones

All Jr. Drivers Must Wear Chest Protector


Class Rules


Rookie

This Is A Learning Exhibition Class With No Points

Dominate Karts/Drivers Will Be Moved Up

Driver Requirement: First Year Racers

Minimum Weight: 250# (kart & driver)

General Rules: WKA

Motor Option #1

Engines: Briggs & Stratton 5 hp Flathead

Restrictor Plate: .425 (Green)

Fuel: Methanol

(Recommended) Motor Option #2

Engine: Bone Stock Predator Motor

Restrictor Plate: .425 (Green)

Fuel: Gasoline (87 octane)

Motor Option #3

Engine: Clone

Restrictor Plate: .425 (Green)

Fuel: Gasoline (87 octane)

Drum Clutch

Pipe: Any single stage, one piece header made from .750” OD steel tubing, with RLV Mini  B-91 Silencer installed thread fitted at the end of the pipe.

Maximum length including muffler 15”, minimum 10”. AKA: WIENIE PIPE

 bone stock predator only - .425 green restrictor


JR. 1

Driver Requirement: Ages 5-10

Minimum Weight: 250# (kart & driver)

General Rules: WKA

Motor Option #1

Engine: Briggs & Stratton 5 hp Flathead

Restrictor Plate: .425 (Purple)

Fuel: Methanol

Motor Option #2

Engine: AKRA Clone Motor (196cc)

Restrictor Plate: .425 (Green)

Fuel: Gasoline (87 octane)

Motor Option #3

Engine: Predator

Restrictor Plate: .425 (Green)

Fuel: Gasoline (87 octane)

Pipe: Any single stage, one piece header made from .750” OD steel tubing, with  RLV Mini  B-91 Silencer installed thread fitted at the end of the pipe. Maximum length including  muffler 15”, minimum 10”. AKA: WIENIE PIPE

** Stock Predator Motors .425 (Green)


JR.  2

Driver Requirement: Ages 10-12

Minimum Weight: 275# (kart & driver)

General Rules: WKA

Motor Option #1

Engine: Briggs & Stratton 5 hp Flathead

Restrictor Plate: .500 (purple)

Fuel: Methanol

Motor Option #2

Engine: Briggs & Stratton 6.5 hp. Animal

Restrictor Plate: .275 / 3.25 (blue)

Fuel: Methanol

Motor Option #3

Engine: AKRA Clone Motor (196cc)

Restrictor Plate: .500 (purple)

Fuel: Gasoline (87 octane)

Pipe: Any single stage, one piece header made from .750” OD steel tubing, with RLV Mini B-91 Silencer installed thread fitted at the end of the pipe. Maximum length including  muffler 15”, minimum 10”. AKA: WIENIE PIPE

** No Predator Motors

 

JR. 3

Driver Requirement: Ages 12-15

Minimum Weight: 300# (kart & driver)

General Rules: WKA

Motor Option #1

Engine: Briggs & Stratton 5 hp. Flathead

Restrictor Plate: .575 (gold)

Fuel: Methanol

Motor Option #2

Engine: Briggs & Stratton 6.5 hp. Animal

Restrictor Plate: .505 (gold)

Fuel: Methanol

Motor Option #3

Engine: AKRA Clone Motor (196cc)

Restrictor Plate: .550 (blue)

Fuel: Gasoline (87 octane)

Large Pipe

** No Predator Motors


Cage 2

Driver Requirement: Ages 8-10

Minimum Weight: 365, 350# (kart & driver)

General Rules: WKA

Motor Option #1

Engine: Briggs & Stratton 5 hp Flathead

Restrictor Plate: .425 (purple)

Fuel: Methanol

Motor Option #2

Engine:  Briggs & Stratton 6.5 hp. Animal.

Restrictor Plate: .225 - 3-hole (purple)

Fuel: Methanol

Motor Option #3

Engine: AKRA Clone Motor (196cc)

Restrictor Plate: .425 (green)

Fuel: Gasoline (87 octane)

Pipe: Open Pipe

** No Predator Motors

CLONE 350

Driver Requirement: Ages 16 & over

Minimum Weight: 350# (kart & driver)

Engine: AKRA Clone Motor (196cc)

Fuel: Gasoline (87 octane)

Pipe: Open Pipe

** No Predator Motors


FLAT 350

Driver Requirement: Ages 16 & over

Minimum Weight: 350# (kart & driver)

Engine: Briggs & Stratton 5 hp Flathead

Fuel:


SR. PREDATOR

Weight: 360, 380, 420# (kart & driver)
Age: 14+
1. Engine must be run out of box.
2. You can remove the governor but you don't have to.
3. You can remove the oil sensor.
4. Air filter and sock must be installed per factory.
5. Engine must have a key way installed by factory on the flywheel.
6. You  may disconnect throttle top screw.
7. You must run factory gas tank.
8. You can only bolt on a chain guard.  No aftermarket add ons.
9.  You can vent the gas cap. (per safety, the cap must be taped down)
10. No engine builder stickers on these motors.  They are stock motors.
11. Fuel: 87 Octane only
12. Carburetor: Must remain stock (no alterations)
13. Engine:  Predator 212 cc engines No exchanging or mixing of parts between motors.
14. Cylinder head:  Must be OEM Predator type casing only.  Intake and Exhaust ports must remain as factory produced.  Porting or deburring is not permitted.  Transition edge from port runner to bowl area must retain defined edge.  Head gasket surface must remain stock.  No copper or aluminum gaskets.
15. Valve: stock valves only
16. Valve Train:  must use stock pushrods, rocker arms, retainers and valve springs.  No alterations or aftermarket valve train components allowed.
17.  Camshaft must remain stock.
18.  Crank rod and piston must be factory without any modifications.  Stock piston rings.
19. You must run the stock head gasket.  No thin head gaskets.
20.  We recommend a full length bumper that extends the length of the rear wheels for added safety.
**If you refuse tech, you will be removed from the class for the remainder of the season**
**If your engine is found to be modified after tech, you will be disqualified and removed from the class for the remainder of the season**  (All points will be forfeited)
**If a driver wins a certain amount of races (to be determined yet), the track will take your motor and give you another one.  (Brand new in box)


Rules Subject To Change As Needed For Fair Competition & Safety